Creating a Secondary Environment

You can create secondary environments to route the inbound email traffic of individual mailboxes of a domain to other destination servers.

By default, the inbound email traffic of all mailboxes of a domain is routed to the destination server that has been defined as the primary environment in the Spam and Malware Protection module (see Adjusting the Primary Environment Settings). If the inbound email traffic of individual mailboxes of a domain shall be routed to other destination servers instead, you can create secondary environments for these destination servers.

  1. Log in to the Control Panel with your administrative credentials.
  2. From the scope selection, select the domain for which you would like to create a secondary environment.
  3. Navigate to Service Dashboard.
  4. Select the tab Service Dashboard.
  5. Click on Add secondary environment under Secondary environments.
    Figure 1: Add secondary environment

    A menu opens.

  6. Select the tab corresponding to the type of secondary environment that you would like to create (see Types of Secondary Environments). You can choose from the following types of secondary environments:
    • Individual
    • POP3/IMAP
    • Hornet.email
    Figure 2: Select tab
  7. In the field Name of environment in the Control Panel, enter the name under which the secondary environment shall be displayed in the Control Panel.
    Figure 3: Enter name of secondary environment
  8. Optional: If you have selected the tab Individual, enter the IP address or the hostname of the destination server in the field Destination server address.
    Figure 4: Enter address of destination server
  9. Click on Add.
    Figure 5: Add secondary environment

    The secondary environment is created and added to the table under Secondary environments.

    Figure 6: List of secondary environments

A secondary environment has been created.

Next, you can assign the secondary environment to mailboxes of your domain (see Changing an Environment).